DIY Makey Makey Case from Katy Marshall

Case and Photo by Katy Marshall

This is a beautifully designed case for Makey Makey designed by Katy Marshall.

This design is for laser cutting, you stack the layers with the Makey Makey inside and hold it all together with 4 sets of clear plastic screws (3M x 16mm). Red lines are to be cut and blue are for marking/scoring (cut at a lower power so it marks the perspex but doesn't cut all the way through.)

Disclaimer: Please be aware these MakeyMakey v1 and v1.2 cases by Katy Marshall are licensed under Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) licence.

Case and Photo by Katy Marshall

Make your own case with these files courtesy of Katy Marshall.

• Makey Makey Case SVG File
• Makey Makey Case DXF File
• Makey Makey Case ai File